Another Borbely clone – almost…

You may remember this post about a clone of one of Erno Borbely’s design. Now there’s another one! …but unlike the last one, which was green, this one is red! 😀

It is actually a combo of amp and PSU from ebay seller jimsaudio. The amp is not really a pure Borbely design, but instead a Borbely JFET frontend mated to a (Walt Jung) diamond buffer output stage – which in itself doesn’t really matter if the sound is OK. Quite like the last one though, it is full of parts that are now pretty much impossible to find. However, 20 years of “collecting” parts can actually be helpful sometimes :D.

The power supply is also a “bastard” design – a tweaked version of Borbely’s take on the Sulzer regulator I think. However, Erno has definitely left his mark here as well – even the regulator uses some very hard to find transistors – and I can’t be the only one that winces a little at putting “unobtanium” devices like 2SK170BL/2SJ74BL JFETs in a power supply? OK, it was only one pair of each and I had an odd number anyway, but still it hurts a bit…. ( 🙂 )

Anyway, if the results are worth it then I can live with it and initial impression is definitely that it is. The sound is smooth and detailed without any noise or hum, even from just a simple bench test. Now all that remains is the usual waiting period before I get around to making the rest of the mechanical stuff for the casing – shouldn’t be more than a year or two 😀

PS: While looking around the internet I found another Borbely design for a tube/FET hybrid line stage running at just +/- 24VDC. It comes in two variations, one intended for line stage duty and the other one beefed up a little to drive headphones. The differences are small though, so it should be possible to put both variations on the same PCB. I am thinking that there could be a way to redesign this with transistors that are still available – maybe not 100% the same performance, but it would be worth a go I think 🙂

Advertisements

One Response to Another Borbely clone – almost…

  1. Pingback: Project files: The Borbely Hybrid headamp | theslowdiyer

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: