Project files: LM1875 Gainclone

What is it?
The project files for my mini gain clone with the LM1875 IC as described here. The download file includes both the amplifier board and the matching PSU-board.

How big are the boards?
The amplifier boards measures 1.8” x 1.3” (app. 33 x 46 mm.)  and the PSU board measures 3.9” x 1.8” (app. 99 x 46 mm.)

What is the status of the boards?
Both boards are v1.0. I have built a working prototype, but detailed testing is on hold until I have build another set that I want to turn into a finished amplifier. All I know is that the design plays music just fine on the test bench 🙂

Does it use any special/expensive/hard-to-find parts?
Not really, unless you choose to go overboard with expensive boutique parts, such as premium capacitors and fast rectifiers. You can, but you don’t have to… 😀

Anything else I need to know?

  • The boards are intended to be used in dual-mono configuration with one supply board per amplifier. Take the speaker output from the amplifier board and the speaker ground connection from the spare ground terminal on the PSU output connector. It is of course also possible for two amps to share a PSU, but you may struggle with wiring everything with reasonably thick cables.
  • If you want to mount the amplifier in a 1U/40mm heatsink you need to keep the capacitors on the PSU board below app. 30mm in height and the amplifier board mounted perpendicular to the heatsink. If you have more space it is possible to mount the boards directly to a 50mm heat sink (parallel to the heat sink with the IC mounted from the underside). This would however mean you have to bend the pins of the LM1875 to fit yourself, because there is no standard pin configuration that supports this way of mounting.
  • You can mount R4 either on the top or the bottom of the board. I’d recommend that you use the opposite side of where the amplifier IC is mounted for easiest access.
  • There are more versions of the LM1875 IC depending on how the leads are shaped (straight and two different bend patterns in both 90deg and 180deg versions). From the datasheet I honestly can’t determine the correct order code for this board, so you’re on your own here… 😉

Download design files here

Related information:
Note: Always read the “intro post” for additional important information about my designs.

Read the LM1875 datasheet for more information. I’d also recommended the kit manual as a good source of information.



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: