Project files: The last of its kind…

…for a while at least 😀

What is it?
The last (and smallest) version of my EL2k buffered headphone amp using NOS Elantec 2008/2009 buffer ICs. This is the smallest version designed for 1.5″ heat sink profiles as described here. The two other versions are of course also still available (here and here):

How big are the boards?
The board measures 3.95″ x 1.5″ (app. 100 x 38 mm.) and is obviously a mono amplifier channel.

What is the status of the boards?
I’ve called this board version 1.5 as it is a redesign. Apart from the redesign work described in a previous post, the circuit is identical to the other published files.

Does it use any special/expensive/hard-to-find parts?
Yes.

  • The EL2008/EL2009 buffers have been out of production for 10+ years. They can still be found and I don’t think you need to be especially concerned about fakes – there can’t be a lot of demand for these anymore – but of course no guarantees. The main risk is probably that instead of NOS parts that you get used parts that have been pulled from old equipment. This is annoying, but should be OK.
  • The heat sink profile is the same as the original, Fischer SK68, in 37mm length. Easy to get in Europe, but I’m not sure about elsewhere.

Anything else I need to know?

  • I’ve had to mount the buffers on the side of the heat sink that has an M2.5 slot and not an M3-slot. This isn’t a problem as such because there’s no need to isolate the tab, you’ll have to remember to buy M2.5 screws for mounting 😀
  • Otherwise this is a bog-standard buffered opamp circuit and there isn’t much that can go wrong 🙂

Downloads:
Download design files here

Related information:
Be sure to read the original posts for additional information and tips.

Note: Always read the “intro post” for additional important information about my designs.

Advertisements

One Response to Project files: The last of its kind…

  1. bonsimike says:

    If anyone needs some of these buffers I have about 10k of them NOS just do a search on Ebay for EL2009 buffers

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: