ACP+ clone progress…

Just a quick update because my ACP+ clone is now (very nearly) done. It took a bit longer than I had expected because of some delays getting boards and parts, and I do actually still miss one part that will hopefully turn up next week – fingers crossed.

As I did with the “Whammy” headamp I’ve taken the original “all-in-one” board layout of the ACP+ and turned it into a mono amplifier board and a separate PSU (and offboard volume control). Other changes include:

  • New heat sink profile (Fischer SK104 or equivalent).
  • Various footprint-changes for parts on the amplifier board.
  • Larger footprint for the initial filtering resistors in the PSU so it’s possible to use inductors instead.
  • Output switching (pre/headphone) directly on the board with a tiny Omron relay (these are the parts that I am still missing).

Until I get the relays I can’t do the last bit of testing but so far the PSU works and both amplifier channels bias correctly and play clean audio and that is always a good starting point 🙂

More information (and hopefully better pictures…) to follow when everything is done.

One Response to ACP+ clone progress…

  1. Pingback: Project files: The ACP+ clone… | theslowdiyer

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: