HackerNAP/HackerCAP

One of my (numerous) neglected projects is a version of the “HackerNAP” Naim clone amplifier. Naim is one of those brands that have a very loyal following, and many of their original designs have been analysed extensively by DIY’ers looking for improvements. The HackerNAP is one of those derivatives and the NCC200 from Avondale Audio is another – ebay is awash with other (more or less accurate) versions as well by the way.

Part of the reason why this project hasn’t been top of the list is that did not like the original HackerCAP PSU boards, so with a small delay (of around three years…) I decided to do my own version instead 😀

To be honest this isn’t how I would normally have done a PSU board – if had designed from scratch I would have made a larger board, used two full bridges and a full ground plane – but as the chassis are already drilled for the original boards I kept the physical size as close to the original as I could.

While the board size isn’t 100% the same as the original HackerCAP, I’ve retained the option to configure the design for both “normal” PSU usage and also for CRCRC or CLCLC configurations.

As the PSU boards are now done and tested, I can hopefully manage to do the rest of the assembly in less than three years 😀